Oil Regeneration

UkrBudMash Ltd. sells Hydraulic Press DB 2240 (second-hand, but completely in an excellent working condition).

Hydraulic Press DB 2240 characteristics:

- Purpose: The Hydraulic Press is intended for pressing large-size products.
- Capacity of press, 1000 tons on sq. cm;
- Lift cylinder capacity, 200 tons on sq. cm;
- Center pusher capacity on combustion stroke 160 tons on sq. cm; on backward stroke 80 tons on sq. cm;
- Back pusher capacity on combustion stroke 25 tons on sq. cm; on backward stroke 20 tons on sq. cm;
- Stage movement cylinder capacity 27 tons on sq. cm;
- Hydraulic fluid nominal pressure 320 kg on sq.cm.
- Walking beam move - 1000 mm.
- The established capacity of electric motors, kw 40,5.

The Hydraulic Press Dimensions:

Length 6400
Width 5030
Height 9800
- Height press above a level of a floor, mm 6500
- Weight press, kg 69800

Only 100.000 USD.

Regeneration of transformer oils is needed when the transformer oil has deteriorated to a level whereby regular oil purification (cleaning & filtration) is no longer adequate. The regeneration or reclamation process requires passing the deteriorated transformer oil through an adsorbent media such as specifically prepared (know-how) sorbent powder.

Sorbent powder’s consumption in URM-0,5 is ranged between 4% and 6% of the weight of regenerated oil. One-pass clay load is 50 kg, which enables regeneration of 1 ton of oil.

The URM-0,5 system includes oil heater, coarse filter, fine filter, and oil pump are assembled together in a single unit (Fig.1). A press-filter, the separate unit (Fig. 2), holds sorbent powder for final processing of oil
that has passed the main unit.

Oil Regeneration & reclamation systems for industrial lubrication oils. Transformer Oil Regeneration Station type (R) 0,8 is apply to purify and regenerate the used insulating oils such as power transformer oil, high-voltage switch oil, mutual inductor oil whose viscosity at temperature 50 C does not exceed 70 cSt. It removes water, gas, particulate matters, free carbon, deep oxides. It also removes acidity and vaccuumizes a transformer. The Station can recover the oil color. After purification, the used insulating oil can reach international standard and recover its original function. Oil Regeneration Station is used for mounting, repairing and operating high-voltage oil equipment with voltage up to 1150 kV (power transformers, high-voltage switches, mutual inductors, cable and capacitors which have insulation system). The machine complies with number 4 category placement and climatic design UHL as per GOST 15 150-69. Capacity, m3/h 0,7 Sorbent consumption, % by oil weight 4-6 One-time sorbent feeding, kg 50 Oil temperature, 95 Oil heater power, W 27 Set power consumption, W 37 Three-phase VAC~ 50 Hz, V 380.

Oil Regeneration & reclamation systems for industrial lubrication oils. Transformer Oil Regeneration Station type (R) 0,2 is apply to purify and regenerate the used insulating oils such as power transformer oil, high-voltage switch oil, mutual inductor oil whose viscosity at temperature 50 C does not exceed 70 cSt. It removes water, gas, particulate matters, free carbon, deep oxides. It also removes acidity and vaccuumizes a transformer. The Station can recover the oil color. After purification, the used insulating oil can reach international standard and recover its original function. Oil Regeneration Station is used for mounting, repairing and operating high-voltage oil equipment with voltage up to 1150 kV (power transformers, high-voltage switches, mutual inductors, cable and capacitors which have insulation system). The machine complies with number 4 category placement and climatic design UHL as per GOST 15 150-69. Capacity, m3/h 0,7 Sorbent consumption, % by oil weight 4-6 One-time sorbent feeding, kg 50 Oil temperature, 95 Oil heater power, W 27 Set power consumption, W 37 Three-phase VAC~ 50 Hz, V 380.

 
UkrBudMash Plant Ltd

ul. Sadovskogo 8, Poltava, 36034 Ukraine

tel/fax: +38 0532 66-86-45

tel/fax: +38 0532 66-86-17

tel/fax: +38 0532 66-86-42

http://www.ukrbudmash.com.ua

E-mail: info@ukrbudmash.com.ua

 

Oil Regeneration System URM-0.7 is one of the rang eof transformer oil regeneration systems proposed. It is designed for regeneration of transformer oil, industrial oil, and turbine oil, with viscosity up to 70 cSt at 50С, removing solids, water and gases from the oils. The oil regeneration plant is used for mounting, repairing and operating of high-voltage oil equipment with voltage up to 1150 kV (power transformers, high-voltage switches etc.)

UkrBudMash Plant Ltd

ul. Sadovskogo 8, Poltava, 36034 Ukraine

tel/fax: +38 0532 66-86-45

tel/fax: +38 0532 66-86-17

tel/fax: +38 0532 66-86-42

http://www.ukrbudmash.com.ua

E-mail: info@ukrbudmash.com.ua

 Only 31.300 Euro

If you can read this post, it means that the registration process was successful and that you can start blogging

• Main
• archives
• Albums
• Links

«	December 2008					»
Mo	Tu	We	Th	Fr	Sa	Su
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30	31

• Hydraulic Press DB 2240 2240
• Oil Regeneration Station type URM - 0,5
• Oil Regeneration Station type URM - 0,8
• Oil Regeneration Station type URM- 0,2
• Oil Regeneration System URM-0.7
• Congratulations!

• General [6]

• RSS 2.0